lower quarter panel repair sheet metal

[65 Valiant]

Just after cleaning and flexing i found some small holes in the quarter panel drivers side. It's in the lower section.
Who knows if repair sheet metals for this section are available or who has one?
I think i've to cut out the bad part and weld in a new one.

Not available in Germany :-((

thx JAN

 

[Rengo]

well you can cut out the section and weld a piece in, I believe most reproduction panels are 18 gauge? not sure I just know its alot thinner than stock. I would also paint over from the body curve down.

 

[Rick@Laysons]

1963-65 Plymouth Valiant or Barracuda:
New Die Stamped Quarter panel patch panels. Correct gauge thickness - Made in the USA - not Taiwan Junk. We have two versions available. The first is the wheel well patch - covers the entire wheel lip area with 3" additional sheetmetal all the way around - square cut. The second is the patch behind the wheel well lip (covers the first 6" of the wheel lip itself as well) to the rear valance panel. Goes up to just past the body curve in the panel that is a little above the rear bumper level.

40" long by 19-1/2" tall. Dead center of arch to top of panel is 7" in heigth.
KK-635WPL 1963-65 Left Wheel Well Patch Panel $174
KK-635WPR 1963-65 Right Wheel Well Patch Panel $174
KK-635WPP 1963-65 Pair of Wheel Well Patch Panels $338

30" long by 14" tall
KK-635RPL 1963-65 Left Rear patch panel $155
KK-635RPR 1963-65 Right Rear patch panel $155
KK-635RPP 1963-65 Pair of Rear patch panels $298



These panels are in stock on the shelf here in the warehouse and are ready to ship out.

These panels can be shipped via postal mail to Germany to save on brokerage fees.

Thanks,
Rick

 

[65 Valiant]

1963-65 Plymouth Valiant or Barracuda:
New Die Stamped Quarter panel patch panels. Correct gauge thickness - Made in the USA - not Taiwan Junk. We have two versions available. The first is the wheel well patch - covers the entire wheel lip area with 3" additional sheetmetal all the way around - square cut. The second is the patch behind the wheel well lip (covers the first 6" of the wheel lip itself as well) to the rear valance panel. Goes up to just past the body curve in the panel that is a little above the rear bumper level.

40" long by 19-1/2" tall. Dead center of arch to top of panel is 7" in heigth.
KK-635WPL 1963-65 Left Wheel Well Patch Panel $174
KK-635WPR 1963-65 Right Wheel Well Patch Panel $174
KK-635WPP 1963-65 Pair of Wheel Well Patch Panels $338

30" long by 14" tall
KK-635RPL 1963-65 Left Rear patch panel $155
KK-635RPR 1963-65 Right Rear patch panel $155
KK-635RPP 1963-65 Pair of Rear patch panels $298



These panels are in stock on the shelf here in the warehouse and are ready to ship out.

These panels can be shipped via postal mail to Germany to save on brokerage fees.

Thanks,
Rick

Can you e-mail me some pics, so that i know what parts i need?

thx Jan

 

[memike]

Don't mean to high jack this thread Rick, what about the 66 model, this is a one year body style, Do you have these repair panels, unlike the 65 body lines . Thank you. :happy10:

 

[Rick@Laysons]

Jan and Mike....you both have PM's.

THX...Rick

 

[gbaker]

Is the wheel well patch both underneath and the outside or just the outside

 

[Rick@Laysons]

Here's a pic of the patch panels.......

 

[63 Valiant]

What website/who made the patch panels? I have been looking for a long time with no real luck, i did find out at 1 point nos made whole rear quartes for the 63 valiant. So who makes these?