[SOLD] Lunati Small Block Solid Flat Tappet Cam Part # 40416 – Used

[Rocket]

For sale is a nice used Lunati solid flat tappet camshaft part number 40416. It was used a couple of seasons in a bracket A body. It is in nice used shape. Great bracket racing cam. I do not have the lifters. Specs are as follows

Advertised Duration IN/EX: 308/318
Duration @.050 IN/EX: 269/279
Gross Valve Lift IN/EX @ 1.5 rocker ratio: .582"/.603"
Lobe Sep Angle / Intake Ctr Line: 106/102
Valve Lash IN/EX: .018"/.020"

Price is $115 shipped in the lower 48 states. I will also ship internationally for the additional cost.

 

[Rocket]

Bump

 

[QuickDart360]

How would this work for a hot 360 street bruiser? Currently have 292 mopar cam. This quite a step up. Lobe separation is tighter.

 

[Rocket]

I would say it depends on your combination of components and goals for the car. Tall gears, single plane intake and a high stall converter or manual trans are a must to take advantage of the cam. It worked well in a bracket car.

You could start a thread in the small block section with your cars combination and goals on this forum to see what others think.

 

[Rocket]

Still available

 

[Rocket]

Bump

 

[Rocket]

bump

 

[Rocket]

Bump

 

[Rocket]

Bump

 

[Rocket]

Bump

 

[Rocket]

bump

 

[Rocket]

bump

 

[B3422w5]

That is a great deal considering cam core are in short supply
For a stroker with 8 inch vert and compression, would be a nice cam.