[SOLD] magnum hydraulic roller comp cams

-
Status
Not open for further replies.
1

1bad360duster

Well-Known Member
Joined
Dec 2, 2009
Messages
303
Reaction score
153
Rating - 0%
0   0   0
Contact seller
Just putting a feeler ad to see if anybody is interested. I have a hyd roller that i ran at the track three times and some street driving. Was in a 360 with rpm air gap, ported edelbrocks and 1 5/8 headers, 3800 stall. Car went 11.12 at 121.
cam specs are: comp cam
239 @50 intake 247@ 50 exhaust. i believe .595 intake lift .606 exhaust lift. 108 lsa.

I may be upgrading to bigger motor and bigger cam so just seeing if anybody would be interested in this.
275$ plus shipping

Location 10573, Thanks
 
here is the cam card full specs
upload_2021-5-26_11-31-42.png
 
1bad360duster said:
Just putting a feeler ad to see if anybody is interested. I have a hyd roller that i ran at the track three times and some street driving. Was in a 360 with rpm air gap, ported edelbrocks and 1 5/8 headers, 3800 stall. Car went 11.12 at 121.
cam specs are: comp cam
239 @50 intake 247@ 50 exhaust. i believe .595 intake lift .606 exhaust lift. 108 lsa.

I may be upgrading to bigger motor and bigger cam so just seeing if anybody would be interested in this.
275$ plus shipping

Location 10573, Thanks
Click to expand...
What gear and converter were you running with it?
 
1bad360duster said:
4.1 rear gears with 29.5 tall tire. ptc 9.5 approx 3800-4000 stall. the converter and intake are also available if interested. its a great street strip combo.
Click to expand...
Converter question: 904 or 727, does it also only have 3 runs and some street time? How much?
 
318willrun said:
Converter question: 904 or 727, does it also only have 3 runs and some street time? How much?
Click to expand...
the converter has more then that, it was in the car a couple years. the cam was in a fresh engine build. I will have to get back to you on a price/would also want to sell cam first
 
Status
Not open for further replies.
-

Back
Top