Making the duster rollable

[SRT_DSTRHOLC]

Does anyone know how i can put the Duster on Rollers, so I can move it around, but take the rear end and front end off? Ive seen it done before, but I do not have the mechanical ability to do it myself. Any help would be awesome. I believe they are called casters?http://www.myrideisme.com/Garage/hallner/211/1368/

Maybe someone can help me make them and I can pay you?

 

[1970Duster]

https://store.uscartool.com/Mopar-ABE-Body-Car-Moving-Body-Wheel-Set_p_18.html

 

[afbill]

as 1970duster said, you can buy caster systems, or you can build them yourself. A couple months agao Mopar Magazine had an article about caster systems.

good luck and from what I've seen it's not hard. Even a novice can do it.

 

[SRT_DSTRHOLC]

Yeah i just dont have a welder or anything like that. I rather have someone who has done it before. And Spending 400 on some, is not my cup of tea. Thanks though guys!

 

[afbill]

you could use angle iron and bolt everything together. My understanding is that the best place to connect to is the rear leaf spring connection point and the front bumper connection. there may be better places.....come on people....help out here!!

as a last resort you may have to find a shop near you that will build them for you.

 

[SRT_DSTRHOLC]

Yea. And I appreciate all the help.

 

[cudascott]

I fabbed mine up myself with flat stock steel and pipe and tires
here's some pics to give you an idea. If you want check out the pics
of my 67 fastback Barracuda (the title) on the members restoration forum
Oh yea and they do turn by hand if needed