Dusterdude72
IN MOPAR MUSCLE MAGAZINE
I bought the master cylinder about a year ago brand new for around $50 or $60 or so. I also purchased a manual brake push rod which I believe I paid around $40 for. ( I had a hard time finding one at the time and it still seems they are few and far between).
I installed the master cylinder on my 72 Duster which was (and still is) in the middle of a restoration. So the master cylinder actually only has about 15 miles worth of driving on it and worked perfectly up until I removed it today because I converted to power assist brakes.
It is dusty and has a little bit of surface rust here and there on the exterior (see pictures) but should clean up easily.
I will also include the bolt and nut that mount the pushrod to the brake pedal arm, And I will also include the plastic mounting plate that goes against the firewall.
Asking $50.00 INCLUDING shipping within the states.
located in lower MI.
Paypal preferred.
PM with interest , Thanks
I installed the master cylinder on my 72 Duster which was (and still is) in the middle of a restoration. So the master cylinder actually only has about 15 miles worth of driving on it and worked perfectly up until I removed it today because I converted to power assist brakes.
It is dusty and has a little bit of surface rust here and there on the exterior (see pictures) but should clean up easily.
I will also include the bolt and nut that mount the pushrod to the brake pedal arm, And I will also include the plastic mounting plate that goes against the firewall.
Asking $50.00 INCLUDING shipping within the states.
located in lower MI.
Paypal preferred.
PM with interest , Thanks
