[SOLD] McLEOD PRESSURE PLATE #360156

-
Status
Not open for further replies.
G

goldmine

Well-Known Member
Joined
Jul 29, 2012
Messages
158
Reaction score
55
Location
Homer Glen IL
Rating - 100%
5   0   0
Contact seller
Fits small block and possible big block. Brand New...installed but never run. Went a different direction. $175.00 plus shipping....SOLD

Pressure plate 1.JPG


Pressure plate 2.JPG
 
Last edited:
pomonamissel said:
can you get an eleven inch set up if in a sm bl 130 bellhousing ?
Click to expand...
Not familiar with that bell housing. I have a '68 340 with the original 2843887 casting number bell housing. If I put a tape measure across the pressure plate it measures 11''. I have a disc listed that was part of my set up.
 
yes i see its all one unit , but does the pressure plate hit the bell housing inside , did mcleod say it will fit a 130 stock bellhousing for a la motor (273 318 340 360 ) these motors only came with a 10.5'' clutch setup even the 340 360 hp's .
 
pomonamissel said:
yes i see its all one unit , but does the pressure plate hit the bell housing inside , did mcleod say it will fit a 130 stock bellhousing for a la motor (273 318 340 360 ) these motors only came with a 10.5'' clutch setup even the 340 360 hp's .
Click to expand...
All I can tell you is it fit like a glove in my bell housing. I went to a diaphragm pressure plate. If you look at all three pieces I have for sale, they all fit within my 340 bell housing with no issues.
 
pomonamissel said:
400 shipped to me 95126 .
Click to expand...
If I guess at the weight USPS shipping is around $145.UPS is around $165. That leaves me around $260-$280. Can't do it for that. Willing to knock off $65 for the package and you pay the shipping. I'll get exact shipping costs. You will probably be in the low $500's. Unfortunately you are far from the Chicago area.
 
Status
Not open for further replies.
-

Back
Top