NorwayCuda69
Well-Known Member
- Joined
- Mar 30, 2006
- Messages
- 79
- Reaction score
- 1
Hey,
i use a milodon windage tray in a deep milodon 360 pan. the engine is a stroker assembly 4".. i had to lift the tray off the crank and notch the opening plates so the rods will clear. I also had to bend and file the tray so the larger pickup (milodon) didn't touch the tray.
has anyone else done this mod, so i can compare it? the minimal distance from rods etc.. now the tray touches the sides of the pan. im afraid it will vibrate? any with experience? i have only used the original 340 tray on earlier builds
tnx jo
i use a milodon windage tray in a deep milodon 360 pan. the engine is a stroker assembly 4".. i had to lift the tray off the crank and notch the opening plates so the rods will clear. I also had to bend and file the tray so the larger pickup (milodon) didn't touch the tray.
has anyone else done this mod, so i can compare it? the minimal distance from rods etc.. now the tray touches the sides of the pan. im afraid it will vibrate? any with experience? i have only used the original 340 tray on earlier builds
tnx jo