[SOLD] Misc engine parts, SB & BB

[smartken22]

Here are a few parts that I have for sale. Shipping on all items will be a flat rate of $12 unless you live near me and you can pick up locally. Items are located in Central California. Thanks guys!

1) MSD Plug wires P/N: 31319 for 383/400/440 engines. This set is missing one wire, but remaining wires are brand new. Asking $50 or best offer.

2) New COMP Cams High Energy Pushrods 7831-16. Steel, Heat-Treated, 5/16 in. Diameter, 6.881 in. Length, Universal, Set of 16 $20

3) New Mopar Performance Fuel Pump Eccentrics P4120484. $35

4) New Edelbrock Performer RPM Air-Gap Intake Manifold P/N: 7576. Intake was never used, looks like a thermostat was installed and removed. Intake just needs cleaned up. All mating surfaces are still brand new. $250

5) New COMP Cams High Energy Hydraulic Lifters 822-16. $75

6) COMP Cams Magnum Pushrods 7692-16. Chromoly, Heat-Treated, 5/16 in. Diameter, 7.342 in. Length, Mopar, Small Block, Set of 16 $100

 

[smartken22]

Here is a pic of the other pushrods 7692-16.

 

[38 Dodge]

pm sent

 

[smartken22]

Intake and both sets of pushrods are pending sale. Fuel Pump eccentric is sold. Thanks!

 

[smartken22]

All items are still available with the exception of the fuel pump eccentric. Thanks! Flexible on pricing, just no lowballers please.

 

[smartken22]

MSD Big Block wires are sold! Thank You!

 

[smartken22]

OK here is whats left:

1) Edelbrock Air Gap Intake
2) Pushrods (both sets)
3) Lifters - pending sale
3) Stock 340 oil pan, melling oil pump(P/N: M72 w/40,000mi on it when pulled), oil pickup and windage tray. Newly listed: $80 shipped

All items remaining are new except the stock oil pan setup and are best offer. Thanks again!

 

[imopar360]

What the best you can do for the air gap picked up?

 

[smartken22]

PM Sent

What the best you can do for the air gap picked up?

 

[smartken22]

Lifters are sold. Thank you! Air Gap intake sale pending.

 

[smartken22]

Magnum pushrods are sold. Thank You!

 

[smartken22]

Intake and oil pan setup is still available.

 

[38 Dodge]

Here is a bump for you,
Thanks for the fast shipping on the cam eccentric.

 

[smartken22]

Awesome, Thank you!

Here is a bump for you,
Thanks for the fast shipping on the cam eccentric.

 

[smartken22]

The intake and oil pan are still available, but I will be closing out this thread to start a new one. I have a lot more new parts to post so I do not want to keep adding them to this one. Stand by for the new post and lower prices. Thanks all!