blue missile
Well-Known Member
Here are a few pics of the sway bar.
Because of the different arcs created by the different components of the suspension, if I set the link for the bar at 0* vertical at ride height, it goes to aprox 10* out of vertical at full droop & full compression.
Does anyone know if this is within acceptable limits?
Andrew
Because of the different arcs created by the different components of the suspension, if I set the link for the bar at 0* vertical at ride height, it goes to aprox 10* out of vertical at full droop & full compression.
Does anyone know if this is within acceptable limits?
Andrew