These are a pair of rebuilt lower control arms with sway bar mount tabs on them that are used on 1973-76 A-body cars such as Duster, Dart, Demon, Valiant, Scamp.
I recently found this pair on a 1974 Plymouth Valiant, but officially are for any A body car using a sway bar, from the 1973 model year until the 1976 model year. The sway bar mount tab is in a different location on the 72 and earlier A body cars.
These control arms will fit and work, on any A body car from 1962 until the 1976 model year. It's where the sway bar mount tab is located on the LCA, that make them year specific to the A body line of cars.
I have cleaned these control arms of 39 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust. You finish painting them with whatever texture, and color of paint that you prefer.
These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale. You can't go wrong starting out with parts from California, Nevada, Arizona, out here in the western states.
The rubber rebound bumpers were shot, and i had to replace them. The bushings alone cost me near $35.00, rebound bumpers $18.00. So if you factor in what it took to bust these LCA's off the car in the wrecking yard, then paying for them, buying the bushings, bumpers, doing the press work on the bushings, i need to see $260.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done. I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $100.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here and on eBay. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
The price is "firm." No deals, no trades, no beating around the bush, with an ad not stateing everything from me, the seller, of the parts.
>>>>>>See my other ad, as i also have the sway bar, that i removed from this vehicle, up for sale.
$260.00 for the parts, $45.00 for the S&H, (FEDEX'ing,) + 3% Pay Pal
Send me a pm message if your interested, and we can go from there.
Jim V.
I recently found this pair on a 1974 Plymouth Valiant, but officially are for any A body car using a sway bar, from the 1973 model year until the 1976 model year. The sway bar mount tab is in a different location on the 72 and earlier A body cars.
These control arms will fit and work, on any A body car from 1962 until the 1976 model year. It's where the sway bar mount tab is located on the LCA, that make them year specific to the A body line of cars.
I have cleaned these control arms of 39 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust. You finish painting them with whatever texture, and color of paint that you prefer.
These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale. You can't go wrong starting out with parts from California, Nevada, Arizona, out here in the western states.
The rubber rebound bumpers were shot, and i had to replace them. The bushings alone cost me near $35.00, rebound bumpers $18.00. So if you factor in what it took to bust these LCA's off the car in the wrecking yard, then paying for them, buying the bushings, bumpers, doing the press work on the bushings, i need to see $260.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done. I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $100.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here and on eBay. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
The price is "firm." No deals, no trades, no beating around the bush, with an ad not stateing everything from me, the seller, of the parts.
>>>>>>See my other ad, as i also have the sway bar, that i removed from this vehicle, up for sale.
$260.00 for the parts, $45.00 for the S&H, (FEDEX'ing,) + 3% Pay Pal
Send me a pm message if your interested, and we can go from there.
Jim V.
