These are a pair of rebuilt lower control arms with sway bar mount tabs on them that are used on 1965-72 A-body cars such as Duster, Dart, Demon, Valiant, Scamp, and the early 1st and 2nd generation 1965 to 1969 Barracuda's.
I recently found this pair on a 1972 Dodge Dart, but officially are for any A body car using a sway bar, from the 1965 model year until the 1972 model year. The sway bar mount tab is in a different location on the 73 and later A body cars.
These control arms will fit and work, on any A body car from 1962 until the 1976 model year. It's where the sway bar mount tab is located on the LCA, that make them year specific to the A body line of cars.
I have cleaned these control arms of 41 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust. You paint them with whatever texture, and color of paint that you prefer.
These control arms are not heavily rust pitted pieces of junk like you find in the rust belt states here in America. But in my opinion there was very light surface rust scale that when you paint them up again, you probably will never know.These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale.
I installed new control arm busings from the NAPA store that i deal with locally. The rebound bumpers are in excellent shape, and i didn't have to replace them. The bushings alone cost me near $40.00, so if you factor in my labor time what it took me to bust these things off a car in the wrecking yard, initially paying for them, cleaning them up, buying the bushings, doing the press work on the bushings, i need to see $260.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done. I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $100.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on this site. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
The price is "firm." Not interested in any kind of "trades" or low ball offers, other than the stated price.
Send me a pm message if your interested.
$260.00 for the parts, + FEDEX'ing to your zip code, + 3% Pay Pal.
Jim V.
I recently found this pair on a 1972 Dodge Dart, but officially are for any A body car using a sway bar, from the 1965 model year until the 1972 model year. The sway bar mount tab is in a different location on the 73 and later A body cars.
These control arms will fit and work, on any A body car from 1962 until the 1976 model year. It's where the sway bar mount tab is located on the LCA, that make them year specific to the A body line of cars.
I have cleaned these control arms of 41 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust. You paint them with whatever texture, and color of paint that you prefer.
These control arms are not heavily rust pitted pieces of junk like you find in the rust belt states here in America. But in my opinion there was very light surface rust scale that when you paint them up again, you probably will never know.These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale.
I installed new control arm busings from the NAPA store that i deal with locally. The rebound bumpers are in excellent shape, and i didn't have to replace them. The bushings alone cost me near $40.00, so if you factor in my labor time what it took me to bust these things off a car in the wrecking yard, initially paying for them, cleaning them up, buying the bushings, doing the press work on the bushings, i need to see $260.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done. I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $100.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on this site. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
The price is "firm." Not interested in any kind of "trades" or low ball offers, other than the stated price.
Send me a pm message if your interested.
$260.00 for the parts, + FEDEX'ing to your zip code, + 3% Pay Pal.
Jim V.
