Mounting on a rotisserie

[LS-300]

I.m getting ready to mount my 68 Barracuda to a rotisserie. The back mounts I have the unibody plate from the manufacturer of the rotisserie. Up front is where I need assistance. I'm thinking of making a mount to bolt to the frame then the arms of the rotisserie would go through them. How have others don this. Pictures would be a big help. Thanks

 

[KosmicKuda]

I made a rotisserie for my 69 Barracuda for $10. I used angle iron to mount the front of the car to the rotisserie. The angle iron goes against the sub-frame rails and has holes to use the front bumper bracket tapped holes. They go forward a little beyond the radiator area and weld to the cross piece that connects to the pivot. I found it harder to come up with the rear mounts.

 

[LS-300]

What has nobody ever done this?

 

[toplscuda]

I thought I had pics of mine but can't find them. I used some heavy angle iron and drilled holes to match where the front bumper brackets bolted to the frame. Used the factory bumper bracket bolts to attach it.

 

[muddacres]

I just used bumper bolts.
Jim