rklein383
Well-Known Member
- Joined
- Dec 2, 2005
- Messages
- 2,218
- Reaction score
- 1,834
I am fitting up my new sheet metal on my 71 Barracuda. I took some measurements prior to dis-assembly but would like verification that they are good measurements. I need the full opening width of the trunk.
I have mine mocked up with sheet metal screws and am getting a 54 15/16 measurement. My original measurements were 54 13/16 at the top and 54 7/8 at the bottom. I am thinking I am in pretty good shape, but would like to see what others have.
I would use forebodiesonly but you guys are much more active than the e-body site.
Thanks,
Rod
I have mine mocked up with sheet metal screws and am getting a 54 15/16 measurement. My original measurements were 54 13/16 at the top and 54 7/8 at the bottom. I am thinking I am in pretty good shape, but would like to see what others have.
I would use forebodiesonly but you guys are much more active than the e-body site.
Thanks,
Rod