Mount surface on damper to center of V needs to be 1-3/4” or very slightly over. I have a fatty damper
Prefer single groove, but not fussy
I have no room to use more than 1/8” fan spacer if absolutely necessary, space is tight,
Thick radiator, fan clutch, 70+ W/P.
Mancini MIGHT have what I need,
69-71 Hemi w/o power steering, but while that one does at least give overall dimensions, they are too busy to measure the actual useful piece of information.
Prefer single groove, but not fussy
I have no room to use more than 1/8” fan spacer if absolutely necessary, space is tight,
Thick radiator, fan clutch, 70+ W/P.
Mancini MIGHT have what I need,
69-71 Hemi w/o power steering, but while that one does at least give overall dimensions, they are too busy to measure the actual useful piece of information.
