03ramit1
Well-Known Member
I am in need of a shop that can roll a 2inch Aluminum tube into 3/4 of a circle. You guys know a shop that can handle it? The circle needs to be close to 4th in diameter
Need help az guys
- Thread starter 03ramit1
- Start date
-
inkjunkie
Well-Known Member
Might want to contact http://addictivedesertdesigns.com/
03ramit1
Well-Known Member
Thanks doug I see you made it home. Hope it was an uneventful trip
EARLYHEMIBILL
Well-Known Member
There's a guy on ebay that has some aluminum tubing that has some really tight bends. Perhaps he can help. Also, a couple of years ago I had to turn some 2" aluminum into a very tight turn on a turbo setup. I got some 2" 90 degree bend on ebay and cut some wedges into it and had it welded shut. Didn't look bad after it I sanded off the excess weld. Perhaps that would work for you. It cost me $50. Bill
-
