new 318 rod bearings (Stock)

[SirDan]

New set of 8 318 rod bearings. These are sealed power bearings and are stock size NOT undersized. These were not run in the engine but i did have a few of them in the rods torqued to specs. I plastigauged a few of these bearings and realized my crank was .010 undersized :banghead:

Here is a link to them on summit:
http://www.summitracing.com/parts/SLP-2130CP/

I am looking for $40 plus shipping for them.

 

[SirDan]

Bump, Shipping should be cheap. Great deal if your budget building.:thumleft: