[FOR SALE] NEW Wiseco Pro-Tru 318 +.030" *forged* pistons

[NoCar340]

Wiseco forged pistons, 3.94" bore, still in all the original packaging. 1.800" compression height, flat top w/5cc valve reliefs, 5/64"-5/64"-3/16" ring lands. Standard pin diameter, use with either press or floating rods. Coated skirts. Pins and spirolox are included, rings were not provided with these. Weight-matched by Wiseco within 1g (535/536 according to what they wrote on the box & pistons). Part #PT083A3 (no longer available from Wiseco) but identical to new part #PTS529A3. Water spot shown in valve relief is OE Wiseco; these haven't been out of the box previously. I'll post more pics this evening.

$450+shipping.

 

[ch1ll]

What is piston weight?

 

[NoCar340]

What is piston weight?

Wiseco forged pistons, 3.94" bore, still in all the original packaging. 1.800" compression height, flat top w/5cc valve reliefs, 5/64"-5/64"-3/16" ring lands. Standard pin diameter, use with either press or floating rods. Coated skirts. Pins and spirolox are included, rings were not provided with these. Weight-matched by Wiseco within 1g (535/536 according to what they wrote on the box & pistons). Part #PT083A3 (no longer available from Wiseco) but identical to new part #PTS529A3. Water spot shown in valve relief is OE Wiseco; these haven't been out of the box previously. I'll post more pics this evening.

$450+shipping.

 

[NoCar340]

As promised, more photos...

Both pistons I took out had water spots on them. These were drop-shipped to me directly from Wiseco and have been in a dry environment since, so blame Wiseco!

Weight of piston was hand-written by someone at Wiseco:

All of the original parts, packaging and paperwork are here and in fantastic shape.

 

[RustyRatRod]

@Garrett Ellison

 

[NoCar340]

I can deliver these to Jefferson WI swap meet @ no cost April 28-30th if paid.