notchback vinyl top molding clip help

[ming]

Anyone can show me some pictures of the vinyl top molding clips at back pillar clips look like and where to buy please,
Also need clips for lower rocker molding
Clips.
Thank you in advance.

 

[ming]

Do see other post but confuse
Anyone?

 

[ming]

Anyone have the clips

 

[ming]

Any member had hard time finding clips
Any suggestions really need some input

 

[DesertRat]

Stand by

 

[DesertRat]

Here are photos of my 67 notch with vinyl top. My car came this way and I removed the SS trimmers for a new top install. The trimmers have studs integrated and fasten with speed nuts. The window trimmers are 68/69. I know the window trimmers are not repopped but I don’t know about the vinyl top trimmers. I think you will need a donor car to find them.

 

[ming]

Bought from 2 places all they sent me is the same clips and said this is the clips for cuda it'll work but is nearly impossible to get to the one behind pillar right behind quarter window

 

[DesertRat]

Those are the correct ones. You need speed nuts for the posts, a common body/paint supply item. I know it’s possible but I cant remember what I did. I’ll check my photos tomorrow and see if I can help.

 

[ming]

I do have the speed nuts but the pillar side take the plastic clips with smaller holes no? Like in picture below

 

[DesertRat]

My 67 Barracuda notch did not have any plastic clips. I was able to use all metal clips.

 

[ming]

There's no way to get to the end piece, rest is good
Appreciated

 

[ming]

 

[DesertRat]

I think I lifted the headliner at the sail panel to get the front one.

 

[ming]

Just had the interior done and look at some interior pictures can't get to last stud, not going to bother
Thanks