Oil filter on w5 motor??

[71produster]

Look to find out what you guys use on w5 headed 340 with tti headers for a oil filter.
thanks,stan

 

[71produster]

I got it!!
I used a oil filter relocation kit & 10 an braided line.I'll post some pictures of where I put the filter at in awhile!
I'll make a parts list & the numbers so you'll know when you go get your parts.
stan

Update & pictures

 

[GTXperience]

Stan, it looks like you just provided an answer to an upcoming question that I would have been posting in the next couple of months. Nice.

 

[fireguy12]

Stan the reugular short mopar filter would have fit. Thats all i used when i had the car.

 

[71produster]

What I used to do the oil filter relocate on the Duster.
8' of 10 an stainless braided line,3 straight 10 an fittings,1 90* 10 an fitting,a oil filter relocating kit. Hope this will help someone out.
stan

 

[Michaeluser]

Be careful with that type of spin-on adapter. My friends Sunbeam Tiger had that same thing and came loose and blew oil everywhere. I like the bolt through the center style that you can point the line in any direction. Plus using the added bolt to hold it in place. See the following for idea what I am talking about
http://www.cantonracingproducts.com/cgi-bin/commerce.cgi?preadd=action&key=22-595

 

[71produster]

Thanks for the heads up! I'll keep an eye on it. I did lock tight it!
stan

 

[10secdemon]

i drilled and tap my block to screw AN fittings directly to block, i used a HP-6 race filter on my W5 motor.
:wave: Bob

 

[71produster]

i drilled and tap my block to screw AN fittings directly to block, i used a HP-6 race filter on my W5 motor.
:wave: Bob

Nice motor!Can you show more?
Thanks for the tip next time I take the motor out I'll do that again thanks!!
stan

 

[10secdemon]

that was my 362 CI W5 motor best run was a 9.98 @ 3200lbs. race weight on my DOT tires
http://www.youtube.com/watch?v=z5J_asMiER8
heres a link to a vid a friend made from the CC event from norwalk last year.
gets a new beast for next year :evil: should be a fun ride
my 7 inch convertor flashes 8200 rpm

 

[10secdemon]

362 CI W5 motor