frederick_76 Well-Known Member Joined May 2, 2010 Messages 771 Reaction score 146 Location Milton, Wa. Aug 12, 2010 #1 What oil should i use for break-in? Its a stroked 360 (408 cid). Thanks.
mopardude318 Well-Known Member Joined Jan 7, 2005 Messages 10,906 Reaction score 2,585 Location Gilroy, Ca Aug 12, 2010 #2 Joe gibbs....brad penn....
1970Duster Well-Known Member Joined May 30, 2010 Messages 6,644 Reaction score 215 Aug 13, 2010 #3 I used Joe gibbs for my 340 and Royal Purp for my other motor
rumblefish360 I have escaped the EVIL Empire State! FABO Gold Member Joined Jun 21, 2005 Messages 49,354 Reaction score 23,161 Location Florida Aug 13, 2010 #4 What I did was the Shell rototella and Comp Cams break in fluid. 1 bottle added in the 5 quarts.
jefflock 69 Dart 408 10.08 best pass so far FABO Gold Member Joined May 18, 2006 Messages 3,515 Reaction score 110 Location Kansas Aug 13, 2010 #5 Rotella has lowered the amounts of the additives needed for flat tappet motors. Is your motor a flat tappet or roller cam????
Rotella has lowered the amounts of the additives needed for flat tappet motors. Is your motor a flat tappet or roller cam????
T2R9 Well-Known Member Joined Jun 28, 2009 Messages 330 Reaction score 46 Location Conway, SC Aug 13, 2010 #6 I use a good straight 30W, plus Comp cams break in fluid. Changed it out after and run Valvoline VR1 10-30 which still has plenty of zinc.
I use a good straight 30W, plus Comp cams break in fluid. Changed it out after and run Valvoline VR1 10-30 which still has plenty of zinc.
frederick_76 Well-Known Member Joined May 2, 2010 Messages 771 Reaction score 146 Location Milton, Wa. Aug 16, 2010 #7 Cool. Is the Brad Penn and Joe Gibbs also good as a every day oil or just for the break-in?? Thanks.