Dodge72
Odd one out
Changed directions on my car but I had already gotten a few things done. One of them is my slant six camshaft ground by Oregon Cams. Never installed, still wrapped up in the box they shipped it to me in. It's getting #2106, with these specs :
210int/214exh duration @ 050, with 108 lobe separation and 104in/112ex center line. Full spec sheet below. Meant for a slant with torque in mind, would be a nice for a mild to moderate build. Asking $70 + shipping. No waiting for a regrind and no core, yay!
And I still have my rebuilt slant head. Milled 030", with new exhaust valves, knurled guides, new springs and new seals. Head chamber is 58 cc. All pressure tested, fluxed, cleaned, all good. Ran for maybe a few hundred miles and pulled. Prefer to not ship due to weight, but I can travel in the Pacific Northwest. Drool tubes included. Asking $250 obo, it's taking up valuable space right now on the bench.
I also have Sealed Power 4092M10. 010" undersized main bearings, new in box for $40 + $15 flat rate shipping.
Finally, some CB606G connecting rod bearings, standard size. Packaging is beat to crap but bearings inside are all very nice. Asking $30 + $15 flat rate shipping.
Let me know here or PM me, thank you!
210int/214exh duration @ 050, with 108 lobe separation and 104in/112ex center line. Full spec sheet below. Meant for a slant with torque in mind, would be a nice for a mild to moderate build. Asking $70 + shipping. No waiting for a regrind and no core, yay!
And I still have my rebuilt slant head. Milled 030", with new exhaust valves, knurled guides, new springs and new seals. Head chamber is 58 cc. All pressure tested, fluxed, cleaned, all good. Ran for maybe a few hundred miles and pulled. Prefer to not ship due to weight, but I can travel in the Pacific Northwest. Drool tubes included. Asking $250 obo, it's taking up valuable space right now on the bench.
I also have Sealed Power 4092M10. 010" undersized main bearings, new in box for $40 + $15 flat rate shipping.
Finally, some CB606G connecting rod bearings, standard size. Packaging is beat to crap but bearings inside are all very nice. Asking $30 + $15 flat rate shipping.
Let me know here or PM me, thank you!
