A alg Well-Known Member Joined Dec 22, 2011 Messages 88 Reaction score 5 Location florida Jan 26, 2012 #1 any suggestions on how to install the over center spring on a 71 demon? i had to replace the bushings and sleeve. thanks al graham
any suggestions on how to install the over center spring on a 71 demon? i had to replace the bushings and sleeve. thanks al graham
E ewolfe Well-Known Member Joined Oct 27, 2010 Messages 47 Reaction score 2 Location Kentucky Jan 26, 2012 #2 Just bend it, add a washer and repeat. Do this until it's long enough with the washers pinched in to connect, but press and all the washers will drop out.
Just bend it, add a washer and repeat. Do this until it's long enough with the washers pinched in to connect, but press and all the washers will drop out.
green1 Well-Known Member Joined Dec 6, 2008 Messages 4,639 Reaction score 61 Location Orange Park, Fla Jan 26, 2012 #3 correct, just keep adding washers/spacers. Otherwise, it will hurt you big time.