Hey guys my bro has a 96 ram that I built a 408 for and it seems to suck about a quart of oil every-every other gas fill up through the pcv valve. We have already replaced it twice. Using a valve cover breather/filter on the driver side. A quick swipe with a q tip on the inside of the pcv hose shows excess oil. any suggestions
pcv problem?
- Thread starter sv650
- Start date
-
Petzschler
→Welcome backâ†
a quart through the pcv valve? hmmmm. is there a baffle on the inside of the valve cover directly under the PCV?
ramcharger
Dismember
Do a leakdown test and get back to us with the results.
Yeah there is a baffle running the entire length of the valve cover. I will work on preforming a leak down test and get back to you.
When you pull the air filter off and look down through the tb you can see all the oil pooled up in the intake.( not the stock intake that has the gasket problem- has a hughes airgap fi intake.)
When you pull the air filter off and look down through the tb you can see all the oil pooled up in the intake.( not the stock intake that has the gasket problem- has a hughes airgap fi intake.)
Valiant422
Banned
There shouldn't be oil there, that's for sure.
Were the heads redone?
Were the heads redone?
edbux
Well-Known Member
Stock beer barrel intake manifold? The oil pooling in the plenum wreaks of the plenum gasket blowing out. Why in the world they made the intake a 2 piece?
-
