oliver
Well-Known Member
I have a few things i need to get rid of, trades are welcome im mostly looking for a 700+ cfm mechanical carb or small block parts.
I have a edelbrock performer, all the threads are like new and so are the gasket surfaces, could use a little more clean up. Asking 100 plus shipping.
The holley is a 600cfm 1850, it looks great and has a recent kit in it, no fuel been in it. Ready to run. Asking 130 plus shipping
The cam is a hydraulic flat tappet erson with the matching lifters. Came out of a good running 340, made good power to 6000 rpm's and had great torque. Specs are:
Advertised duration is 292/292, @.050 its 214/214, lift is .449"/.449"
The Performer. Super low- and mid-range power. Good idle, fuel efficiency and
driveability. 4-barrel and headers recommended.
100 plus shipping on the cam and lifters.
I have a edelbrock performer, all the threads are like new and so are the gasket surfaces, could use a little more clean up. Asking 100 plus shipping.
The holley is a 600cfm 1850, it looks great and has a recent kit in it, no fuel been in it. Ready to run. Asking 130 plus shipping
The cam is a hydraulic flat tappet erson with the matching lifters. Came out of a good running 340, made good power to 6000 rpm's and had great torque. Specs are:
Advertised duration is 292/292, @.050 its 214/214, lift is .449"/.449"
The Performer. Super low- and mid-range power. Good idle, fuel efficiency and
driveability. 4-barrel and headers recommended.
100 plus shipping on the cam and lifters.
