see if these are the ones you're looking for.....
Pic of PM-CLIP679
- Thread starter Rick@Laysons
- Start date
-
Rick
If you could measure the stud hole size and the diameter across the tabs I will know for sure.
I sure appreciate all the work you have done.
Thanks
Al
If you could measure the stud hole size and the diameter across the tabs I will know for sure.
I sure appreciate all the work you have done.
Thanks
Al
The diameter of the nylon plug is 1/4". The diameter of the four prongs that go thru the sheetmetal is approx 3/8".
The width of the main body of the nylon clip is just a fuzz over a 1/2".
The width of the main body of the nylon clip is just a fuzz over a 1/2".
-
Similar threads
