Pics of how dougs headers and a borgenson steering box fit.

[abodyjoe]

so my buddy dave has a 360 sitting on a 73 style duster k-frame that he is working on. he has a manual box on it but asked me to bring my borgenson box over to see how it would fit on his set up. these are dougs headers on a 360 bolted to a 73 duster k-frame. he wrapped the header too. the box fits well. one spot is really close that i would put a small ding in the header to give a bit more clearance. not sure how thick the wrap is. may be fine without it. the two white marks is the only spot it touches ever so slightly.

 

[JDMopar]

Thanks for posting the pics. I would have thought it would have 47 miles of room with the little box.

 

[abodyjoe]

Thanks for posting the pics. I would have thought it would have 47 miles of room with the little box.

that one little spot is the only tight spot.

 

[JDMopar]

Yeah, it's not all that bad....but I would think the Borgeson box is a little smaller than a manual Mopar box is why it surprised me. I've never seen a Borgeson and Mopar manual side by side though. It could easily be clearanced with a little heat, 1" socket and a few taps with a BFH.