Plymouth Duster sheet metal

[JGC403]

I have a 1976 Duster that is in need of rust repair. Are the front fenders different between 1973/74 from 1976? Looking at pictures the only years that the sheet metal is different (besides the hood and tail panel) is 1970/71 with the side markers that are flush with the body and then the rest 1972-1976 should all be the same?
On AMD's website there are different part numbers for the fenders:
-1970/71: 200-1370
-1972: 200-1372
-1973/74: 200-1373

So if I wanted my 1976 Duster to have the flush mounted side markers on the front, the 1970/71 fenders should bolt right up?

 

[FlyingFalcon]

I believe that from 73 forward they should be the same. If you wanted to use the 70/71 you'd just have to change the grill and the hood. I prefer the non beak look the best, but I have to say the tail end looks good no matter the year. Hope this helps

 

[Sedanman]

There might be slight difference in the headlight bucket areas. The actual outer shell is the same. The 75-76 I think had rubber fillers that fit into the bumper area (bumper shocks) so the later part #s may be because of this.

 

[Riddler]

1973-1976 are the same. Nothing changed fender wise. I have a 74 fender on my 76.

Riddler