lead69
hopeless car junkie
Cleaning up the garage a bit and have a few small block parts for sale in Vancouver, Wa 98682. I do not want to ship but there are a lot of local fabo guys around me-maybe one might do it for beer 
.
Scat 4" cast crank nib $325 http://www.jegs.com/i/Scat/942/936020/10002/-1?parentProductId=761559
Scat I beam rods nib $300 http://www.jegs.com/i/Scat/942/26123/10002/-1?parentProductId=761557
587 casting heads (same as J heads) came off a low 11 second 360 duster some porting milodon 2.02 intake valves/stock exhaust valves comp springs and plus .050 retainers set up for .600 lift positive valve seals. A little dirty but these were on a complete running 360 I bought that was a track only car so low miles. $550
1972 J heads, tanked with newer guides, no porting, hard exhaust seats also have milodon 2.02 intake/stock exhaust valves no springs/retainers but they do have locks. These were also on a running car but they were going to get upgraded/ported by the previous owner so that is why they are apart. $300
I will get pics soon thanks.
. Scat 4" cast crank nib $325 http://www.jegs.com/i/Scat/942/936020/10002/-1?parentProductId=761559
Scat I beam rods nib $300 http://www.jegs.com/i/Scat/942/26123/10002/-1?parentProductId=761557
587 casting heads (same as J heads) came off a low 11 second 360 duster some porting milodon 2.02 intake valves/stock exhaust valves comp springs and plus .050 retainers set up for .600 lift positive valve seals. A little dirty but these were on a complete running 360 I bought that was a track only car so low miles. $550
1972 J heads, tanked with newer guides, no porting, hard exhaust seats also have milodon 2.02 intake/stock exhaust valves no springs/retainers but they do have locks. These were also on a running car but they were going to get upgraded/ported by the previous owner so that is why they are apart. $300
I will get pics soon thanks.
