Potentials of a 5.2 Magnum Motor

-
66fs said:
Balancers had an offset hole up to about 1972, 273, 318, 340, and 360. Never really messed with a poly 318. Just something to be aware of.
Click to expand...

OK. I've never run across that issue.

The crank snout is the same for the LA and Magnum, so any balancer will fit as far as I know.
 
you can use the early pulleys on a Magnum. you just file the 1 offset hole.
magnum swaps spells all this out for you. Made my life easy when I made the swap.
I used all the parts off the front of my 273 on my magnum. put a 360 oil pan on and dropped her in.
 
I bought a new timing cover, and accessories when I put the Magnum into my Dart. It wasn't too tough at all.
 
You must log in or register to reply here.
-

Back
Top