Power steering fitting question

[fireguyfire]

I’m changing the high pressure power steering hose on my 67 barracuda with a 273 commando engine.
The brass fitting on top of the steering gearbox that the high pressure hose connects to has a 90 degree bend fitting there. In all of my experience with multiple mopars the fitting there is usually a straight in fitting for the hose connection, not a 90.
I have found a few unique things because of the 273 commando engine, and I’m wondering if any of you guys and gals out there could sort me out on what the fitting on top of the steering box for the high pressure hose should be?

 

[4spdragtop]

I'll take pic in 5. Brb

 

[fireguyfire]

Cheers

 

[4spdragtop]

Sorry for shitty pics. Yes the psi side has 90* fitting. Fairview or Parker may mfg them?

 

[Cuda Al]

Yes there should be a 90^ adapter (aka Hemi adapter), 67 only , 273 only (power steering wasn't available on the 383 in 67)
It should point to the side...

Hose goes forward under the battery tray and comes at the pump from the front...
(I'm pretty sure it should go around the battery tray support bracket but my electronic ignition is in the way)

Alan

 

[fireguyfire]

Thanks for the info gents

 

[Bossanova5]

I'm doing a Slant to a 67 273 Commando swap.
Where can I get that 90-degree fitting for the power steering box?
Thanks

 

[Cuda Al]

This is a reproduction that looks correct, it is a standard 90^ fitting if you know the specs (the parts store one may not look correct)

Pardon Our Interruption...

Alan

 

[4spdragtop]

Chk Parker or Fairview. That's an insane price for above...$20 is realistic.