19blockhead72
Well-Known Member
Anyone else have issues? I have a mild cam, j-head, 408 with 273 rockers. When I did the rockers I needed cup and ball push rods and bought a pack of harden Proform from Summit. So put a few hundred miles on them and started hearing a little tap tap so pulled the left side cover. I found that one of the cups was wearing away rapidly so I had to buy another pack of 16 just to replace this faulty one. A few weeks ago started noticing a tap tap one the right side. Pulled the cover for inspection and found one that the ball crumbled and fell apart. I found all the big material and the lifter seemed ok.
I've lost all faith in the rods, anybody have any suggestions in a different brand that you have had good luck with. My cam is small, .480 lift, so maybe even stockers would do. Thanks
I've lost all faith in the rods, anybody have any suggestions in a different brand that you have had good luck with. My cam is small, .480 lift, so maybe even stockers would do. Thanks