project part out

[project360]

A- body, 1974 Scamp............. here are some parts ive been collecting that must go.
Edelbrok TR-5 complete $600 w/ matching afb 500s just rebuilt and tuned, summit tall throttle link and hilborn blower style scoop and all new gasktes, assembled.
or..
Eddie TR-5...$150 shipped
Matching pair just rebuilt Carter AFB 500s....$350 shipped
Hilborn blower style scoop and fliters..... $100 + shipping

2 each, 360s, one stock needs rebuild, and one .060 over bare block and
1974, 904 Trans needs rebuild... taking offers
SOLD...Ported J heads, complete with adjustable rockers........$200 + shipping
small block heads cast 027596 with 1.8/1.6 vavles w. aluminum keepers and good springs $80.00 + shipping
Crower Pro Street solid lift .521/.528 Adv. Duration 294/298 @.050 .243/.245..112 LSA.... $100 shipped
Cloyes true double roller $45 shipped
Weld in sub-frame connectors...80.00 + shipping
HEI dist, pulled from running 360, has HO chevrolet cap....$40 shipped
B&M Pro ratchet shifter, pistol grip with new 5 ft cable.....$150 shipped
SOLD.........Brand new mopar alternator $50.00 shipped
Deep truck pan, small block $20.00 +shipping
Leaf spring relocation kit $95.00 shipped...
Comp engineering fwd motor plate....$ 80.00 plus shipping

8.25 Nitro Gear 4.10s......$100 plus shipping NIB
8.25 Nitro Gear master rebuild..$25 plus shipping
SOLD.......8.25 Dr. Diff HD c-clip race axles A-body length 180 + shipping
8.25 LPW ultimate 10 diff girdle $180 shipped
or 8.25 sure grip posi built RTR with leaf relocation mounted perches for $700.00 and discuss shipping...

1974 Plymouth Scamp.. roller part out or whole, taking offers.

I will email pictures if you leave me an address. THANKS !

will also TXT 520-628-0955

 

[project360]

all pms returned, lots of interest in the heads !

 

[project360]

-------------SOLD------------
J HEADS
ALTERNATOR
8.25 RACE AXLES

thank you !

 

[vwmoparguy]

Thanks Jeremy!

 

[project360]

no prob.

thank you !!

bumpidy bump.... taking offers, most of my stuff is brand new out of the box, or still in the box some pieces

 

[63VALIANT*KISS]

intristed in heads will they bolt on a 77 318 have any specs or are they stock ? did u rebuild them or know if the valve guides and evreything is good to bolt on?

 

[project360]

if your referring to these..
small block heads cast 027596 with 1.8/1.6 vavles w. aluminum keepers and good springs $80.00 + shipping

i pulled these from a running 360 i was in the middle of rebuilding, all i no is the springs and keepers were upgraded before i got them.. stock valve size but previous owner said they were gone through about 8000 miles ago, all looks good, no rocker shafts or arms.
send me an email or txt and i will send you pics.

 

[project360]

parts, parts, parts