Published Front Frame Rail Width Dimensions

[desmo900]

I am going to court over a damaged RMS AlterKtion front end I purchased on eBay. One of the shock towers was bent inward preventing the cross-member from fitting up around the frame rails. The factory AlterKtion is 34 3/4" wide, my bent unit is 34 1/4".

Does anyone have or know where I can get some printed documentation that show the dimensioned frame rail width for a 67' to 76' A-body?

Thanks.

 

[moparchuck67]

Hello, hope this may help.

View attachment 67DartChassis.jpg

 

[desmo900]

Thank you! This is a huge help.

 

[metallidart]

Awesome chart!! Doing some mods to my Dart Sport, and I wanted to make sure it was square before I started welding. Just what I needed! Thanks x2!

 

[mopardude318]

do you have a link to the ebay ad?

 

[dartweld]

Is this the same dimensions for a '68 dart

 

[mopardude318]

yes

 

[dartweld]

Thanks for the chart, much appreciated.

 

[DFX 340 Duster]

I think the diagram from Moparchuck should be a sticky for this forum.

 

[70Duster440]

And for what it's worth, this is from a '70 FSM

 

[philllyc]

Great! Any links send them to me. Assembly manual? [email protected]

 

[podgey]

gday , i have an aussie 65 valiant AP6 sedan , so A-body in your lingo, i am after frame rail width and any other measurements from the firewall forward , any help would be much appreciated.

 

[GeorgeH]

I think the diagram from Moparchuck should be a sticky for this forum.

Definitely, some valuable info there.

 

[Kernel Sanders]

Perfect! as I'm replacing both front frame rails this year! perfect for some verifications!

 

[philllyc]

RMS AlterKtion front end is great.. But is it me? or is that way overpriced!

 

[dukeboy440]

RMS AlterKtion front end is great.. But is it me? or is that way overpriced!

Agreed, thats why I went GTS,

gerstsuspensions.com