tmcc15t
Well-Known Member
Contact seller
Cost is $50.00 for the set
Buyer pays shipping cost
Ships from Washington State, 98387
Lower 48 only
PayPal only
Crank and water pump pulleys for small block LA. The engine these came off of had a cast iron water pump and power steering.
Water pump is a single groove. Diameter is approximately 6 1/2 inch. Depth is approximately 2 5/8"
Cranks is a double groove. Front groove diameter is approximately 6 5/8 inch and the rear is approximately 6 inches. Depth is approximately 2 3/8 inch.
If you need additional pictures, measurements or have a question, please send me a PM. What you see is what you get. Sold as is, no returns.
Thanks,
Tony
Buyer pays shipping cost
Ships from Washington State, 98387
Lower 48 only
PayPal only
Crank and water pump pulleys for small block LA. The engine these came off of had a cast iron water pump and power steering.
Water pump is a single groove. Diameter is approximately 6 1/2 inch. Depth is approximately 2 5/8"
Cranks is a double groove. Front groove diameter is approximately 6 5/8 inch and the rear is approximately 6 inches. Depth is approximately 2 3/8 inch.
If you need additional pictures, measurements or have a question, please send me a PM. What you see is what you get. Sold as is, no returns.
Thanks,
Tony