Quick z bar help

-
First guess worn or missing bushings, broken or missing retainer for bushings; possibly pivots loose at block/bellhousing and inner fender; pivot torn through sheet metal if the brace for it is not on the inner fender....
 
My super bee with a built 440 and race clutch used to do that. Got so bad it would eat the clutch disc in no time. Pulled the transmission and found a crack all the way across the trans tunnel, every time I pushed in the clutch the whole body would flex. shoulda put frame connectors in I guess. oh..and it would shatter the bushings as well. race clutches should have the whole pedal linkage reinforced including the Zbar mount on the frame
 
You must log in or register to reply here.
-

Back
Top