radator and oil cooler help ? which ones

[1994rm250]

hey guys i got a 76 duster got a 383 and 727 going in what radator do i use ? ?can i use my superslant sixrad ? for a bit ? and the tranyy cooler / ? thanks angelo

 

[~LadyLuck~]

If you want to get serious about it go get a Griffen and not worry about cooling issues at all. www.griffenrad.com

~LL~

 

[Lycandart]

Hey there is a guy on E-bay that sells All aluminum radiators for around $170 with the tranny cooler built in

http://stores.ebay.com/OSCARS-RADIATORS_Chrysler-Radiators_W0QQcolZ4QQdirZ1QQfsubZ8QQftidZ2QQtZkm

 

[1994rm250]

= ( no duster rads tho ..

 

[1994rm250]

Lycandart ^^^^^^^^^^^^

 

[Lycandart]

But he does have a few that will fit.

 

[1994rm250]

can i get a challenger one to fit ?

 

[Lycandart]

All of the ones he has that are around 18 x27 will work just make sure you get the inlet and outlets on the correct sides for your app or change waterpump housing.

 

[kenny b]

I bought a 3 core radiator for a 1976 dodge 1 ton with a 440 engine. With slight griding to the support brackets on the rad, it slipped into my 1971 demon with a 440 six pack. Used the water pump housing from 440 source with the inlet on the passenger side and hoses from the local parts store. Looks as if it was a factory install. Works great too as the fan assembly was taken from a 3/4 ton 318 pickup truck. Hope this helps

kenny b

 

[496dart]

i use a truck housing and a universal Griffin alum radiator ($170 at summit) . Just measure your car and go from there-=--you can make anything work...