Rear sway bar?

[DartDust]

I am building a 70 dart with a 440, 727 with a 8 ¾ posi. I beefed up the front with 1.03” torsion bars and a heavy sway bar. I moved my rear springs into the frame rails and installed the heavy leaf springs. My question is, does any one make a rear sway bar that will work with the springs in the frame rails, or do I even need to worry about it. I an building to drive to the local cruses and to go on the Hot Rod Power Tour in 2014. Any help will be greatly appreciated.

 

[JLP]

You should be fine without a rear bar. I would do frame rail connectors with a 440. Nice ride.

 

[74DartSwinger360]

I would do frame connectors like uscartool ones and a rear sway bar I believe an addco will work with your application

 

[DartDust]

I didn’t think to put that in my post but they are already installed. Thanks

 

[jrlegacy23]

Hellwigs E-Body rear sway bar works. It just requires a 3/4 spacer on each side. Look at this link:
http://www.forabodiesonly.com/mopar/showpost.php?p=1254264&postcount=95

 

[DartDust]

I new if anyone would know you’ll would.
Thanks

 

[jrlegacy23]

I new if anyone would know you’ll would.
Thanks

Thats not my car, but I am on the same path. Good luck with your build