[WANTED] rear wheel lip moldings

[72bluebird]

wanted 1967 though 73 Plymouth valiant rear wheel lip moldings 2 door or 4 door i think they are the same

 

[cannucky]

Laysons sells them , they're not cheap but they are available ,I think year one and Classic sell them as well .used ones are usually dinged and twisted .

 

[Dragonsteel]

Laysons sells them , they're not cheap but they are available ,I think year one and Classic sell them as well .used ones are usually dinged and twisted .

There must be two styles of wheel moldings because I bought a used set off of ebay that was made from stainless steel not aluminum and they were all ding free.

 

[694spd]

I'm pretty sure that the stainless steel ones were found on the 67-68 models.

 

[cannucky]

Who said anything about aluminum ? I've only ever seen the stainless ones , thats what Laysons was selling the last time I had a set in my hands at Moparfest , if you got a clean set used then all the power to ya I find trim is best bought nos or repop if thats the only way to get it .

Classic has them on for $72.99 each wheel they are front and back left and right specific , look for the Abody or Dart ones not the Barracuda . Throw something else on the order to get it over $349 and they are giving 35% off so it will be like getting the something else for free .

 

[694spd]

I guarantee that neither Laysons or Classic Industries has any repro stainless steel wheel opening moldings for A-bodies. I have been looking for a nice set for a long time and have come up empty handed so far.

Here is a link to Laysons web site showing what the sell for a 1967 Dart The year that used a SS wheel opening trim.
http://www.laysons.com/Catalog.cfm?nCatID=792&nModelID=5&nModelYear=1967