What i have here are a pair of upper control arms that are used on the 1973-76 Mopar A Body cars such as Dart, Valiant, Duster, Demon. These control arms are required to be used on 1972 and earlier A body cars when doing a disc brake conversion to the larger 4 1/2 inch bolt pattern B or E body disc brakes or the 73-76 A body disc brakes.
I cleaned them up of all the grease and grime in the solvent tank, and then soaked them off in a solution of a product called Evaporust, to remove the surface rust from these control arms. You paint them the color, and texture paint of your choice. I will leave that up to you. A very nice pair of upper control arms. One of the best pairs that i have come across. Not rust pitted pieces of junk, from the rust bucket states here in the USA.
I have installed new ball joints, and control arm bushings. If you rebuild Mopar control arms you know how stubborn they can be at times, to remove. So i have already performed that labor for you.
50+year old ball joints, and bushings, are not the most friendly things to remove, and then install new ones.
A very nice pair of UCA's. This set i found last week while making my wrecking yard rounds. This pair are now the last ones that i have in stock. These 40+ year old cars are not showing up in my area anymore, and these UCA's in this condition are getting hard to find.
Selling this pair at $350.00.
Payment will be thru Pay Pal, or a good old fashioned postal money order.
Interested parties, please send me a pm thru this forum, for payment instructions.
Thank's a lot.
Jim V.
hemi71x
I cleaned them up of all the grease and grime in the solvent tank, and then soaked them off in a solution of a product called Evaporust, to remove the surface rust from these control arms. You paint them the color, and texture paint of your choice. I will leave that up to you. A very nice pair of upper control arms. One of the best pairs that i have come across. Not rust pitted pieces of junk, from the rust bucket states here in the USA.
I have installed new ball joints, and control arm bushings. If you rebuild Mopar control arms you know how stubborn they can be at times, to remove. So i have already performed that labor for you.
50+year old ball joints, and bushings, are not the most friendly things to remove, and then install new ones.
A very nice pair of UCA's. This set i found last week while making my wrecking yard rounds. This pair are now the last ones that i have in stock. These 40+ year old cars are not showing up in my area anymore, and these UCA's in this condition are getting hard to find.
Selling this pair at $350.00.
Payment will be thru Pay Pal, or a good old fashioned postal money order.
Interested parties, please send me a pm thru this forum, for payment instructions.
Thank's a lot.
Jim V.
hemi71x
