Remember this cam...(crane cam)

[JoeDust451]

The CCH-312-2, I had one in a 70 340 Duster, it was a 4sp. with 3.91s, stock bottom end, Had triple valve springs. I used to shift that thing at 7200 RPMs, sometimes as high as 7400 , It would free rev. past 8000 & bury the tac . Anyone ever run this cam in the day? I thought they even made a CCH-320-2 also, its been awhile (about 25 yrs.), I bought the car like that, I thought it was the CCH-320-2 that was in it, Heck it crackled untill 3000 where the cam started coming alive, I pulled it & installed the smaller CCH-302-2 to calm things down. I remember it wouldn't idle below 12-1300 RPMs.

http://www.cranecams.com/product/cart.php?m=product_detail&p=24034

 

[Sport 360]

I ran the CCH-320-2 in my 340 6Pak years ago, sounded and worked great !!
What were the specs on that one ??

 

[dodgetkboy78]

Built quite a few with the 312 and 320 cranes, they were on the shelf at the warehouse up here, along with the 320 WOlverine blue racer, which was the same cam for less price.

 

[JoeDust451]

Then it was the 320 it had, just didn't see a listing for it & its been awhile ago, i do remember the lift being pretty high, like .570-.580, somewhere around there.

 

[dodgetkboy78]

if I remember it was 320/320, 565/565, 110.

Wolverine also made a 320/320, 460/460, 114, great cam too, worked pretty good in 360's and big blocks that needed brakes..... cam and lifters for 119$...

Sigh, things sure have changed.