srduster340 FABO Gold Member FABO Gold Member Joined Jan 17, 2007 Messages 1,162 Reaction score 336 Location Decatur,Ga. Aug 1, 2008 #1 Anyone ever put a Richmond/Doug Nash 5 speed in an A-body? Are transmission tunnel mods needed?
R racingsnake440 Well-Known Member Joined Aug 29, 2005 Messages 335 Reaction score 22 Aug 1, 2008 #2 they're a pretty bulky trans so i can't imagine it would go in without modifying the tunnel
1 1969340dart Well-Known Member Joined May 17, 2006 Messages 441 Reaction score 8 Location Porter Texas Aug 1, 2008 #3 Yes you will have to modify the tunnell area,the linkage rods will hit the tunnell area on that side and it will hit or be very close in other areas also. But they sure are nice transmissions.
Yes you will have to modify the tunnell area,the linkage rods will hit the tunnell area on that side and it will hit or be very close in other areas also. But they sure are nice transmissions.
srduster340 FABO Gold Member FABO Gold Member Joined Jan 17, 2007 Messages 1,162 Reaction score 336 Location Decatur,Ga. Aug 4, 2008 #4 What about shifter placement. How far of is it from stock?
fstfish66 Well-Known Member Joined May 8, 2006 Messages 4,615 Reaction score 73 Location east coast Aug 12, 2008 #5 and pricey tooo
srduster340 FABO Gold Member FABO Gold Member Joined Jan 17, 2007 Messages 1,162 Reaction score 336 Location Decatur,Ga. Aug 13, 2008 #6 1969340Dart, will the linkage hit the trans crossmember? That's my biggest concern.