Ride height for 68 Valiant

[Speed Junkie]

I have a 1968 valiant with a 225 slant 6 and it is a 3 on the tree. I am currently trying to align the suspension and I can’t find anything on the factory ride height from the floor to the arch of the wheel well. Any help is appreciated.

 

[33IMP]

I have a 1968 valiant with a 225 slant 6 and it is a 3 on the tree. I am currently trying to align the suspension and I can’t find anything on the factory ride height from the floor to the arch of the wheel well. Any help is appreciated.

The factory doesn't measure ride height that way, so you won't find that number in a book anywhere. So, set the ride height were YOU want it, then have it aligned.

 

[Speed Junkie]

The factory doesn't measure ride height that way, so you won't find that number in a book anywhere. So, set the ride height were YOU want it, then have it aligned.

Thankyou. Much appreciated

 

[AbodyBB]

That does work but service manual does provide a measurement method. And spec. Here is the section on it from the 67 service manual.

 

[AbodyBB]

Factory ride height?

This thread discusses it as well.

1/8 difference max side to side and
2 1/2 inch difference from T bar socket to bottom of ball joint