rocker assembly question

[rebeldart]

68 340 motor - x heads : the five spacers with bolts between rockers is it the two wide ones on either end with the three narrow in the middle OR two narrow spacers on either end and one narrow in the middle. Wouldn't be asking if I could find a decent pic - I think whoever rebuilt this last had it wrong. Book states I should have "three short bolts and two long ones - the three short bolts go on either end and one in the middle" I think he meant spacers, not bolts (all the bolts are the same size) This is from "How To Rebuild Small Block Mopar Engines" page 135.

 

[fishman]

It is spacers the bolt are all the same size. There is only one way that you can put it together and the rockers be on the valve.

 

[340sFastback]

My SB Eddie heads have three narrow spacers; one on each end and one in the middle. The wider spacers are in between like so:

narrow - wide - narrow - wide - narrow

And my rocker tips are sitting right over the valve stems.

 

[dustertogo]

My SB Eddie heads have three narrow spacers; one on each end and one in the middle. The wider spacers are in between like so:

narrow - wide - narrow - wide - narrow

And my rocker tips are sitting right over the valve stems.

I agree.

 

[daredevil]

also remember there are l amd r rockers