rocker panel relief

[cmac64dart]

I'm trying to remove my rusty rocker panel and I think the panel is winning. I removed every spot weld (unless there's more hidden). the area under the rear quarter is not cooperating at all. Any Ideas.. help

 

[SPACECOWBOY]

You must be missing some ,try a skinny scraper/pry bar and spread it as you work the spot welds. It helped me find which ones were holding, be gentle as you can.

 

[cmac64dart]

You must be missing some ,try a skinny scraper/pry bar and spread it as you work the spot welds. It helped me find which ones were holding, be gentle as you can.

You must be missing some ,try a skinny scraper/pry bar and spread it as you work the spot welds. It helped me find which ones were holding, be gentle as you can.

 

[cmac64dart]

thanks, I'm finding them buried in the sealer in the inner back window panel. I just don't want to take to much. thankfully I have a new /used rocker and have some rust work behind it to take care of anyway. guess ill just keep plugging away at it.

 

[SPACECOWBOY]

Try to grind on the panel you are replacing if possible and try to save the one that is remaining. I am doing full quarters on my Dart right now, it sucks and seems to take forever at 1st.

 

[cmac64dart]

its the floor board / rocker connection that has a bad spot.. fabrication is in my future..if I can ever get the rocker off lol