Rocker panel trim

[65Valiant310]

For a 64/65 Barracuda/Valiant, how is the rocker panel below the door held in place? I am guessing multiple clips? If so, how many clips and do I have to drill holes if the car didnt originally come with the rocker panel trim?
thanks!

 

[barracudadave67]

Try using "3M" double sided trim mounting tape. You might have to double it up. Thats better than drilling holes, and I have heard the mounting clips are very hard to find.

barracudadave67

 

[65Valiant310]

Thanks

 

[mcnoople]

The clips are a wierd wide plastic clip. The way they mounted is what was wierd about them. They are a 2 piece clip. The main body of the clip is a large square body with 4 tabs. These 4 tabs go into the hole in the rocker and the other piece of the clip is a round plastic dowel pin that expands the tabs out locking them into place. If you have removed one of your door windows it is a very similar setup to what they used to hold the glass to the regulator. And before you ask the glass clip will not work for trim.

I think there is 1 screw on the front edge of the trim but my memory is hazy. My trim has been off the car for 10 years cuz I couldn't find clips when it was painted.