[SOLD] Saturday Nite Parts Cleanout

[RAT ROD AL]

I have some more parts to clear out . Everyone should know the routine by now !
Claim parts by # listed. will combine shipping . Prices + shipping from Fl. 33956. Paypal F&F or you pay the fees. Thanks for looking !

#1
one 1" spacer sold... KrzyKuda.
1" & 2.5" sold...Dicer
$5 each 3-1" & 1 -2.5"

#2


Both housings sold... Steve..
34 tooth gear ...sold....plymouth67..
speedo gears $25 each . Teeth count marked on card board ! $5 each for the housings

#3
...sold Garret..
$7. Not sure which Holley this fits so I put the measurement there.

#4
...sold...j-anderson...
S/B 727 tube $10

#5

...SOLD KKuda
from 67 drum brake car. $30 May fit more.

#6
....sold..if3333
Heater control cables for non AC. 67 A body $15 all move freely.

#7

....sold Steve...
Not sure what Mopar this is from. Missing nut for the chrome bezel. $15 Other than that in good shape.

#8
Power brake booster assy. $45. It will surely need to be gone through and freashened up !

#9.......sold RightyTighty........
This one is in nice shape. Guy said it came off his 71 Dart with front disc.. Not sure of the M/C bore... # on M/C is DP33A
$60

Scroll on down for more parts and please claim by # listed.

 

[4spdragtop]

#7 AND #2 a housing please Al! Thanks!

 

[Garrett Ellison]

Sign me up for #3, Thank You!

 

[RAT ROD AL]

#10
67-69 notch barracuda rear side panels. good condition . will need paint. $25 for the pair.

#11
....sold... Kevin...
$15 8 hole plate.

#12
certicard sold OMR
Fuel pump eccentric, 3 drippers & trans line holder...sold Troy
$5 each

#13
...SOLD Steve..
New Remflex SB header gaskets. $20

#14
...SOLD... OMR..
4 and a half sets of SB header gaskets top pair looks like they were installed but not run. All others are new. $25 for the lot.

#15
318 oil pan gasket. $8

#16
Sold....
Massive lot of SB gaskets .. $50 for the lot

#17
lot of 2 440 valley pans with gaskets and 3 Valve cove gaskets All new. The metal trays have a light flash of rust from sitting around in an open box. $30 for all.

Thanks for looking Claim parts by # listed

 

[4spdragtop]

#13 please

 

[rustycowll69]

Price on #9?

 

[eekvonzipper]

Sign Me Up for #11 and I'll take the #16 Gasket Lot Also! (#11 I need the Gaskets for My Oil Adapter)

 

[RAT ROD AL]

Price on #9?

Thank you ! $60 . I just edited it .

 

[Righty Tighty]

Next on #9 after rustycowl. Also is the inspection cover in #12 for a 904 or 727?

 

[RAT ROD AL]

Next on #9 after rustycowl. Also is the inspection cover in #12 for a 904 or 727?

Not sure on the cover. I can measure the hole pattern and let youknow.

 

[Righty Tighty]

Thank you. If it’s for a 727 I will take it.

 

[dartfreak75]

Sign Me Up for #11 and I'll take the #16 Gasket Lot Also! (#11 I need the Gaskets for My Oil Adapter)

You beat me to it by 15 mins

 

[64 AAR Valiant]

Certi card #12
And #14

 

[Mopar Al]

Thank you. If it’s for a 727 I will take it.

14 if it is still available. Also a small block oil slinger if you have one

 

[CFD244]

#12
Hi Al....Fuel pump eccentric (if not scored), all 3 drippers (if for SB), and transmission line holder.

Thanks

 

[eekvonzipper]

You beat me to it by 15 mins

17 actually!

 

[RAT ROD AL]

Price on #9?

Rusty, are you interested in this or just letting me know I needed a $$$. another member wants it.

 

[Lonnie Leach]

# 12 what are the date codes on temp sensors ..Looking for a late 72

 

[RAT ROD AL]

# 12 what are the date codes on temp sensors ..Looking for a late 72

I have no idea. I'll see if I can find a date on em !

 

[Lonnie Leach]

I have no idea. I'll see if I can find a date on em !

just send me pics of what is stamped on them

 

[RAT ROD AL]

can anyone tell me what the starter shield in this lot is for ? And the small inspection cover ?

 

[rbkt65]

rt side oval type spacer is for starter. left side next to cooler line bracket is for older convertor cover. plate to inspect bolts without taking starter totally off.

 

[RAT ROD AL]

rt side oval type spacer is for starter. left side next to cooler line bracket is for older convertor cover. plate to inspect bolts without taking starter totally off.

slant 6 or v8 on the starter plate ?

 

[rbkt65]

i will have to look in parts book, but believe both are same.

 

[rbkt65]

could not find big cover in my parts cd but will look in reg parts book tomorrow. thinking they are same as they are just dust/rock shields. been too many beers ago. removing small cover allows person to drain convertor with out removing starter, braces, if equipped and shield. it takes a diff conv cover than normal.