[WANTED] SB Bellhousing and flywheel

-
Status
Not open for further replies.
I

Ivoryk3ys78

Well-Known Member
Joined
Jul 5, 2018
Messages
210
Reaction score
93
Location
Oregon
Rating - 100%
1   0   0
Contact seller
Looking for a small block bellhousing and flywheel. Wanting to be able to start and run the engine without having to use my 727 for diagnostic purposes.

Thanks a lot
 
I am not sure of everything as far as compatibility goes. This is for an early 360 engine with a 4" cast stroker crank.
 
I have a bell housing also, you will need a specific 360 Flywheel.
 
Ivoryk3ys78 said:
Looking for a small block bellhousing and flywheel. Wanting to be able to start and run the engine without having to use my 727 for diagnostic purposes.

Thanks a lot
Click to expand...
I have a bell housing and flywheel. I used them on a run stand. Flywheel is set up for forged or cast crank. Removable weight for either combination. I ran a 360 and a 340 with this combo. Located near Bakersfield Ca.
 
Thanks for the responses. Looking like me and Early A Bod are pretty set on Bellhousing. My dad is going to check the local junkyard for flywheel with so much shipping weight. Hopefully I will know how that goes by the end of this weekend.
 
7FCB6530-707B-494B-A4E5-B45459983243.jpeg
5C962ABC-D966-4414-AB0D-58BEB7B62DE3.jpeg
BE67520B-A8E8-4D5D-B756-7627F7BAB1EC.jpeg
F1FCC33E-A06E-4D8C-997F-B8F51C42413C.jpeg
E3F7A851-5322-48B4-BDE0-5F2D12CC4330.jpeg
Ivoryk3ys78 said:
Looking for a small block bellhousing and flywheel. Wanting to be able to start and run the engine without having to use my 727 for diagnostic purposes.

Thanks a lot
Click to expand...
Here’s pics of the bell I have
 
Status
Not open for further replies.
-

Back
Top