[SOLD] SB Distributor with Pertronix Ignitor & Ignitor coil

-
Status
Not open for further replies.

Oldschoolcuda

Early-A Body Nerd
FABO Gold Member
Joined
Mar 24, 2008
Messages
5,454
Reaction score
3,558
Location
Chesapeake, Va
Rating - 100%
101   0   0
Contact seller
Rock auto points distributor modified with pertronix ignitor(1381a)& pertronix 1.5 ohm coil(40011). Ran the distributor in my 64 cuda with points for about 500 miles. The ignitor module is installed ,ready to go and is brand new/never run. Coil is new in box.
Converted my 64 to a dual point before selling.
Great setup for stock or slightly modded small block. Drop in , connect the two wires to coil,set timing and your good. No ignition box needed so looks stock. Will also include instructions & gap setting piece.
Everything would cost ya about $160 to build one.

This setup can be yours for $100 plus shipping

Thanks as always for the interest

IMG_0843.JPG


IMG_0844.JPG


IMG_0845.JPG


IMG_0846.JPG
 
Last edited:
Rock auto points distributor modified with pertronix ignitor(1381a)& pertronix 1.5 ohm coil(40011). Ran the distributor in my 64 cuda with points for about 500 miles. The ignitor module is installed ,ready to go and is brand new/never run. Coil is new in box.
Converted my 64 to a dual point before selling.
Great setup for stock or slightly modded small block. Drop in , connect the two wires to coil,set timing and your good. No ignition box needed so looks stock. Will also include instructions & gap setting piece.
Everything would cost ya about $160 to build one.

This setup can be yours for $100 plus shipping

Thanks as always for the interest

View attachment 1715097367

View attachment 1715097368

View attachment 1715097369

View attachment 1715097370


I'm interested, any idea on shipping to the Upper Peninsula, Michigan 49719?
 
Status
Not open for further replies.
-
Back
Top