Sb Head Flow Numbers

[1wild&crazyguy]

yea thats what i thought my buddy plans to go to a 205 and 1625 i think thats right for the ex. but i know the intake is right and 100 long...my other buddy had a set from hughs and thats what they used in them and man what a nice set of heads....should pick up a tab bite with just the valve change not to mention the valve job (5 angle more than likely)...

yep they pick it, nail heads that is, and the stem is good for some too.

they are not much longer=.025, you can cut stem height with no problems, though do check geometry 1st.

 

[Cudafever]

1wild wrote:

say you guys ever hear of the idea that the floors shape/'length' is related to the roofs length? like the roof flow lags or is lower fps compared to the ssr or floor?

With just the 2.02 valve cut in(no other port work), at the end of the floor, at the ssr, there is 400+fps and the roof above it, there is 168 fps and 100 eeash in the pockets( guide to wall )...............