[SOLD] SB heavy duty chrome rocker shafts

[physixx]

I have for sale a pair of aftermarket SB super heavy duty rocker shafts that are thicker walled for much better rigidity without flexing under high valve spring loads, are polished, drilled for larger diameter 3/8” attaching bolts for added strength and have rocker arm oiling holes on both sides of the shafts. I would like to get $50 for the pair plus the shipping.

Ken
Edison, NJ

 

[oldkimmer]

Ken, will these work with a 5/16 bolt and a spacer/sleeve? If so I’ll buy them. Thanks. Kim

 

[physixx]

I'm not sure that using a spacer would be a good idea since the rockers get oiled thru the shafts. If the spacer/sleeve wasn't quite right there might be a problem. Just my thoughts.

 

[brian6pac]

Kim
I think you could drill and tap the head for 3/8" and be fine

 

[physixx]

That's what was done to the heads that these were used on.

 

[oldkimmer]

Ok, if that won’t work for me then if someone else want them go ahead and sell them. I think my speed masters have a heli coil in them. Kim